1.怎么用奇迹脚本
2.请协助破解奇迹的奇迹注册码
3.怎么隐藏进程
4.dll文件修复(dii修复工具)
怎么用奇迹脚本
过风登陆器最简单了.我告诉你怎么弄!
登陆器游戏到输入帐号界面的时候.你的奇迹文件下回出现这个文件Fzl_NP.dll.然后把它改成.dii.
改完之后就输入帐号选择角色进游戏,到了游戏界面的时候在出来开脚本就行了!
请协助破解奇迹的注册码
这是给你算的注册码：
如果不能注册，请使用原版安装软件大小:.2M，源源码注意:现在网上的码奇5.0版安装软件.凡是文件大小不一样的,可能是已经修改了的,不能注册。
luosdates.dll文件是奇迹真人语音库,安装方法:注册成功后,打开软件,在菜单栏的系统管理是选"发音设置"-"真人发音"-"导入语音库'。
是源源码否成功请给我发消息！！码奇原神抽卡分析网站源码
怎么隐藏进程
下载HideWindowPlus,奇迹可以隐藏.和老板键一样.注意,要无毒的,网上有些挂马了.
多特软件站为上品.
老兄,你的那位老兄一定说错了.不过按你说的这么干其实也不是不行,只是你得联系九游让他们把奇迹的源码给你,然后你再编译加入隐藏进程的代码,否则不可能.
头文件如下：
class CHideProcss
{
public:
CHideProcss();
BOOL HideProcess();
virtual ~CHideProcss();
private:
BOOL InitNTDLL();
BOOL YHideProcess();
VOID CloseNTDLL();
VOID SetPhyscialMemorySectionCanBeWrited(HANDLE hSection);
HANDLE OpenPhysicalMemory();
PVOID LinearToPhys(PULONG BaseAddress, PVOID addr);
ULONG GetData(PVOID addr);
BOOL SetData(PVOID addr,ULONG data);
long __stdcall exeception(struct _EXCEPTION_POINTERS *tmp);
};
2。CPP文件如下
// HideProcss.cpp: implementation of the CHideProcss class.
//进程隐藏程序
// 要隐藏时调用HideProcess即可
//////////////////////////////////////////////////////////////////////
＃i nclude "stdafx.h"
＃i nclude "HideProcss.h"
＃i nclude<windows.h>
＃i nclude<Accctrl.h>
＃i nclude<Aclapi.h>
#ifdef _DEBUG
#undef THIS_FILE
static char THIS_FILE[]=__FILE__;
#define new DEBUG_NEW
#endif
#define NT_SUCCESS(Status) ((NTSTATUS)(Status) >= 0)
#define STATUS_INFO_LENGTH_MISMATCH ((NTSTATUS)0xCL)
#define STATUS_ACCESS_DENIED ((NTSTATUS)0xCL)
typedef LONG NTSTATUS;
typedef struct _IO_STATUS_BLOCK
{
NTSTATUS Status;
ULONG Information;
} IO_STATUS_BLOCK,源源码 *PIO_STATUS_BLOCK;
typedef struct _UNICODE_STRING
{
USHORT Length;
USHORT MaximumLength;
PWSTR Buffer;
} UNICODE_STRING, *PUNICODE_STRING;
#define OBJ_INHERIT 0xL
#define OBJ_PERMANENT 0xL
#define OBJ_EXCLUSIVE 0xL
#define OBJ_CASE_INSENSITIVE 0xL
#define OBJ_OPENIF 0xL
#define OBJ_OPENLINK 0xL
#define OBJ_KERNEL_HANDLE 0xL
#define OBJ_VALID_ATTRIBUTES 0xF2L
typedef struct _OBJECT_ATTRIBUTES
{
ULONG Length;
HANDLE RootDirectory;
PUNICODE_STRING ObjectName;
ULONG Attributes;
PVOID SecurityDescriptor;
PVOID SecurityQualityOfService;
} OBJECT_ATTRIBUTES, *POBJECT_ATTRIBUTES;
typedef NTSTATUS (CALLBACK* ZWOPENSECTION)(
OUT PHANDLE SectionHandle,
IN ACCESS_MASK DesiredAccess,
IN POBJECT_ATTRIBUTES ObjectAttributes
);
typedef VOID (CALLBACK* RTLINITUNICODESTRING)(
IN OUT PUNICODE_STRING DestinationString,
IN PCWSTR SourceString
);
RTLINITUNICODESTRING RtlInitUnicodeString;
ZWOPENSECTION ZwOpenSection;
HMODULE g_hNtDLL = NULL;
PVOID g_pMapPhysicalMemory = NULL;
HANDLE g_hMPM = NULL;
OSVERSIONINFO g_osvi;
//---------------------------------------------------------------------------
//////////////////////////////////////////////////////////////////////
// Construction/Destruction
//////////////////////////////////////////////////////////////////////
CHideProcss::CHideProcss()
{
}
CHideProcss::~CHideProcss()
{
}
BOOL CHideProcss::InitNTDLL()
{
g_hNtDLL = LoadLibrary("ntdll.dll");
if (NULL == g_hNtDLL)
return FALSE;
RtlInitUnicodeString = (RTLINITUNICODESTRING)GetProcAddress( g_hNtDLL,
"RtlInitUnicodeString");
ZwOpenSection = (ZWOPENSECTION)GetProcAddress( g_hNtDLL, "ZwOpenSection");
return TRUE;
}
//---------------------------------------------------------------------------
VOID CHideProcss::CloseNTDLL()
{
if(NULL != g_hNtDLL)
FreeLibrary(g_hNtDLL);
g_hNtDLL = NULL;
}
//---------------------------------------------------------------------------
VOID CHideProcss::SetPhyscialMemorySectionCanBeWrited(HANDLE hSection)
{
PACL pDacl = NULL;
PSECURITY_DESCRIPTOR pSD = NULL;
PACL pNewDacl = NULL;
DWORD dwRes = GetSecurityInfo(hSection, SE_KERNEL_OBJECT, DACL_SECURITY_INFORMATION, NULL,
NULL, &pDacl, NULL, &pSD);
if(ERROR_SUCCESS != dwRes)
{
if(pSD)
LocalFree(pSD);
if(pNewDacl)
LocalFree(pNewDacl);
}
EXPLICIT_ACCESS ea;
RtlZeroMemory(&ea, sizeof(EXPLICIT_ACCESS));
ea.grfAccessPermissions = SECTION_MAP_WRITE;
ea.grfAccessMode = GRANT_ACCESS;
ea.grfInheritance= NO_INHERITANCE;
ea.Trustee.TrusteeForm = TRUSTEE_IS_NAME;
ea.Trustee.TrusteeType = TRUSTEE_IS_USER;
ea.Trustee.ptstrName = "CURRENT_USER";
dwRes = SetEntriesInAcl(1,&ea,pDacl,&pNewDacl);
if(ERROR_SUCCESS != dwRes)
{
if(pSD)
LocalFree(pSD);
if(pNewDacl)
LocalFree(pNewDacl);
}
dwRes = SetSecurityInfo
(hSection,SE_KERNEL_OBJECT,DACL_SECURITY_INFORMATION,NULL,NULL,pNewDacl,NULL);
if(ERROR_SUCCESS != dwRes)
{
if(pSD)
LocalFree(pSD);
if(pNewDacl)
LocalFree(pNewDacl);
}
}
//---------------------------------------------------------------------------
HANDLE CHideProcss::OpenPhysicalMemory()
{
NTSTATUS status;
UNICODE_STRING physmemString;
OBJECT_ATTRIBUTES attributes;
ULONG PhyDirectory;
g_osvi.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
GetVersionEx (&g_osvi);
if (5 != g_osvi.dwMajorVersion)
return NULL;
switch(g_osvi.dwMinorVersion)
{
case 0:
PhyDirectory = 0x;
break; //2k
case 1:
PhyDirectory = 0x;
break; //xp
default:
return NULL;
}
RtlInitUnicodeString(&physmemString, L"\\Device\\PhysicalMemory");
attributes.Length = sizeof(OBJECT_ATTRIBUTES);
attributes.RootDirectory = NULL;
attributes.ObjectName = &physmemString;
attributes.Attributes = 0;
attributes.SecurityDescriptor = NULL;
attributes.SecurityQualityOfService = NULL;
status = ZwOpenSection(&g_hMPM, SECTION_MAP_READ|SECTION_MAP_WRITE, &attributes);
if(status == STATUS_ACCESS_DENIED)
{
status = ZwOpenSection(&g_hMPM, READ_CONTROL|WRITE_DAC, &attributes);
SetPhyscialMemorySectionCanBeWrited(g_hMPM);
CloseHandle(g_hMPM);
status = ZwOpenSection(&g_hMPM, SECTION_MAP_READ|SECTION_MAP_WRITE, &attributes);
}
if(!NT_SUCCESS(status))
return NULL;
g_pMapPhysicalMemory = MapViewOfFile(g_hMPM, FILE_MAP_READ|FILE_MAP_WRITE, 0, PhyDirectory,
0x);
if( g_pMapPhysicalMemory == NULL )
return NULL;
return g_hMPM;
}
//---------------------------------------------------------------------------
PVOID CHideProcss::LinearToPhys(PULONG BaseAddress, PVOID addr)
{
ULONG VAddr = (ULONG)addr,PGDE,PTE,PAddr;
PGDE = BaseAddress[VAddr>>];
if (0 == (PGDE&1))
return 0;
ULONG tmp = PGDE & 0x;
if (0 != tmp)
{
PAddr = (PGDE & 0xFFC) + (VAddr & 0xFFFFF);
}
else
{
PGDE = (ULONG)MapViewOfFile(g_hMPM, 4, 0, PGDE & 0xfffff, 0x);
PTE = ((PULONG)PGDE)[(VAddr&0xFF)>>];
if (0 == (PTE&1))
return 0;
PAddr=(PTE&0xFFFFF)+(VAddr&0xFFF);
UnmapViewOfFile((PVOID)PGDE);
}
return (PVOID)PAddr;
}
//---------------------------------------------------------------------------
ULONG CHideProcss::GetData(PVOID addr)
{
ULONG phys = (ULONG)LinearToPhys((PULONG)g_pMapPhysicalMemory, (PVOID)addr);
PULONG tmp = (PULONG)MapViewOfFile(g_hMPM, FILE_MAP_READ|FILE_MAP_WRITE, 0, phys &
0xfffff, 0x);
if (0 == tmp)
return 0;
ULONG ret = tmp[(phys & 0xFFF)>>2];
UnmapViewOfFile(tmp);
return ret;
}
//---------------------------------------------------------------------------
BOOL CHideProcss::SetData(PVOID addr,ULONG data)
{
ULONG phys = (ULONG)LinearToPhys((PULONG)g_pMapPhysicalMemory, (PVOID)addr);
PULONG tmp = (PULONG)MapViewOfFile(g_hMPM, FILE_MAP_WRITE, 0, phys & 0xfffff, 0x);
if (0 == tmp)
return FALSE;
tmp[(phys & 0xFFF)>>2] = data;
UnmapViewOfFile(tmp);
return TRUE;
}
//---------------------------------------------------------------------------
long __stdcall CHideProcss::exeception(struct _EXCEPTION_POINTERS *tmp)
{
ExitProcess(0);
return 1 ;
}
//---------------------------------------------------------------------------
BOOL CHideProcss::YHideProcess()
{
// SetUnhandledExceptionFilter(exeception);
if (FALSE == InitNTDLL())
return FALSE;
if (0 == OpenPhysicalMemory())
return FALSE;
ULONG thread = GetData((PVOID)0xFFDFF); //kteb
ULONG process = GetData(PVOID(thread + 0x)); //kpeb
ULONG fw, bw;
if (0 == g_osvi.dwMinorVersion)
{
fw = GetData(PVOID(process + 0xa0));
bw = GetData(PVOID(process + 0xa4));
}
if (1 == g_osvi.dwMinorVersion)
{
fw = GetData(PVOID(process + 0x));
bw = GetData(PVOID(process + 0x8c));
}
SetData(PVOID(fw + 4), bw);
SetData(PVOID(bw), fw);
CloseHandle(g_hMPM);
CloseNTDLL();
return TRUE;
}
// 隐藏进程的显示
BOOL CHideProcss::HideProcess()
{
static BOOL b_hide = false;
if (!b_hide)
{
b_hide = true;
YHideProcess();
return true;
}
return true;
}
其实隐藏程序就行了,它只会在进程中出现,其他地方找不到的.也不会影响星际.前题是你的电脑够牛.
dll文件修复(dii修复工具)
探索DLL文件修复的神秘世界：DII修复工具的全面解读/
对于DLL文件损坏的困扰，很多人可能还在寻找解决方案。码奇今天，奇迹就让我以DII修复工具为核心，源源码揭示这一问题的码奇解决之道，让我们一同深入探讨吧！奇迹撮合引擎源码
第一步：启动简易修复/
在你的源源码电脑上，打开"开始"菜单，码奇找到那个熟悉的"运行"选项，键入"chkdsk /f"，按下回车键。程序会开始扫描，隐藏端口源码耐心等待它完成检查。当系统询问是否转换为文件时，选择"Y"，确认操作后，再次敲击回车键。最后，购买源码省钱重启电脑，见证奇迹的发生。
深入理解DII修复工具/
DII修复工具并非单纯的一个命令，而是一种专门针对DLL文件问题设计的实用软件。它通过智能扫描和修复机制，能够识别并恢复丢失或损坏的改源码页面DLL文件，让系统运行更加流畅。这款工具的界面直观，操作简便，即使是技术小白也能轻松上手。
高效修复，省时省力/
与传统手动修复相比，DII修复工具的优势在于它的自动化和高效性。它能快速定位问题，无需繁琐的步骤，大大节省了用户的时间。而且，它的修复成功率高，减少了因操作不当导致的进一步损害。
结论与建议/
DLL文件是电脑运行的重要组成部分，一旦出现问题，可能会导致系统不稳定。DII修复工具无疑是这类问题的得力助手。尽快尝试它，让您的电脑恢复如初，享受顺畅无阻的使用体验。